Virginia American Water Recommends Building Operators and Schools Flush Pipes to Maintain Water Quality

June 18, 2020

Virginia American Water Recommends Building Operators and Schools Flush Pipes to Maintain Water Quality

Virginia American Water remains committed to keeping you informed as we continue our work to deliver clean, safe and reliable water and wastewater services to you during the COVID-19 public health emergency.

Extended periods of inactivity in buildings can cause lead leaching or legionella growth in water pipes and taking proper steps can help minimize potential exposure to both of these contaminants. As buildings reopen, businesses, school districts and property management teams will begin the process of restarting building systems that have been dormant for a significant amount of time. Proper reopening procedures help in verifying that water systems and equipment are in safe working order.

The general purpose of flushing is to bring fresh water into all sections of the building. This will require running water through all fixtures long enough to replace stagnant water. The time needed to complete this will be location-specific and may range from a few minutes for smaller buildings to more than 30 minutes for larger or more complex plumbing systems.

Virginia American Water encourages building owners and operators to adopt a proactive approach that includes proper flushing procedures, adjustment of hot water temperature, and proper maintenance of building plumbing and heating/cooling systems. Proper flushing of plumbing before reoccupying these buildings is essential to maintain water quality in the internal plumbing system and should be performed biweekly while the building is closed, if possible, and again in the days immediately prior to opening.

Consistent with Environmental Protection Agency and industry guidance, Virginia American Water recommends bringing fresh water into the building, and flushing individual fixtures, including:

· Toilets: Flush at least twice.

· Faucets: Run both hot and cold water at full flow for at least 2 minutes. Longer times may be needed depending on location.

· Showers: Run both hot and cold water at full flow for at least 2 minutes. Longer times may be needed depending on location.

· Other Appliances/Apparatus: We recommend flushing other appliances and apparatus thoroughly, at full flow, bringing fresh water into the system. If you have an appliance such as a refrigerator or ice maker that has a filter, follow the manufacturer’s instructions to replace water filters after completion of flushing.
Learn More

For additional information on flushing, you can review American Water’s fact sheet; the EPA’s recommendations; the Center for Disease Control and Prevention’s web page; or the American Water Works Association website.

For updates on our response to the COVID-19 public health emergency, visit virginiaamwater.com.

Loader Loading...
EAD Logo Taking too long?
Reload Reload document
| Open Open in new tab

Last modified: June 18, 2020

Comments are closed.

Translate »

DMV-Select is open by appointment only. To schedule an appointment, see ONLINE SCHEDULING on home page.

Click for details
X